Laboratorio de electrica
Equipos a Calibrar


Multímetros, Volmetros, décadas de resistencia,Calibradores de Proceso, Amperímetros, Fuentes de voltaje, Plantas de soldar, pH, Conductividad, celda rédox, controles de temperatura , controles de presión ,controles de humedad, transmisores de nivel, transmisores de temperatura, transmisores de presión, transmisores de humedad.

Alcance de Calibracion:

DC Voltaje: 10 mV to 1000 mV, AC Voltage : 2 mV to 2 mV (50Hz to 1 kHz ), DC : 10 µA to 2 A, AC frecuencia : 10 µA to 2 A(50Hz to 1 kH), Salida AC Voltage Frecuencia: 0.1 V to 650 V (40Hz to 20 kHz ), AC & DC corriente (amplificador de transductancia): 2 A to 20 A, AC & DC Current - y: 2 A to 20 A (30Hz to 1 kHz), : 2 A to 300 A (30Hz to 1 kHz), : 20 A to 20 A(45 Hz to 65 Hz), Salida DC Voltaje: 1 mV to 15 V, Measure AC & DC Corriente: 0.2 mA to 10 A, Measure AC & DC At the listed frequency: 0.2 mA to 10 A (40 Hz to 20 kHz), Resistencia Electrica: 0.1 homs to 1 M homs, Resistanciaelectrica - : 1 homs to 10 M homs.

Calibración de Temperatura; indicación con indicador rtd : RTD Typo Pt 385 and Pt 3926, Pt 3916, Pt 3926 (25 Ω to 100 Ω), Range: -200 °C to 962 °C, contol e indicacion con termocople : Typo J: -210 °C to 1200 °C, Tipo K: -210 °C to 1372 °C, Tipo T: -0 °C to 400 °C, Tipo E: -250 °C to 1000 °C, Tipo R: -20 °C to 1767 °C, Tipo S: -20 °C to 1767 °C, Tipo N: -200 °C to 1300 °C, Tipo B: 600 °C to 18200 °C, Tipo C: 0 °C to 2316 °C,

Laboratorio de Presión
Equipos a Calibrar


Manómetros, Mano-vacuómetros, Vacuómetros, Transductores de presión (mA, V), válvulas de control, seguridad y de alivio.

Alcance de Calibracion:

Pressure Manometers: 100 kPa to 100 500 kPa, Pressure Transducers:100 kPa to 100 500 kPa, Pressures Gages - Direct Comparison: 137 kPa to 1 378.951 kPa, 4.1 MPa to 41 MPa, Pressure Transducers (mA and or V) - Direct Comparison: 137 kPa to 1378.951 kPa, 4.1 MPa to 41 MPa, Vacuum Meters (Manovacuum meters) - Direct comparación: -7 kPa to 0.1 kPa, 0.1 kPa to 7 kPa, -67.708 kPa to -0.1 kPa, Vacuum Meters: -78 kPa to -1 kPa, Mercury Column Gauge Meters Direct Comparison: -78 kPa to -1 kPa, Vacuum Transducer Direct Comparison: -78 kPa to -1 kPa, Absolute Pressure Gages Direct Comparison: 77.985 kPa to 2 067.533 kPa, Pressure Gages Direct Comparison: 200 kPa to 2 067.533 kPa, Absolute Pressure Transducers (mA / V) Direct Comparison: 77.985 kPa to 2 067.533 kPa, Pressure Transducers (mA / V) - Direct Comparison: 200 kPa to 2 068.427 kPa, Pressure Gages - Direct Comparison: 2060 kPa to 20 684.3 kPa, Pressure Transducers (mA / V) - Direct Comparison: 2060 kPa to 20 684.3 kPa, Pressure Gages- Direct Comparison: 0.69 kPa to 6.9 kPa, ssure Transducers (mA / V) - Direct Comparison: 0.69 kPa to 6.9 kPa, Pressure Gages- Direct Comparison: 0.025 4 kPa to 0.25 kPa, Pressure Transducers (mA / V) - Direct Comparison: 0.025 4 kPa to 0.25 kPa, Security and Light Valves: 0.6 MPa to 41 MPa,
Laboratorio de Temperatura

Termómetros de líquido, Termómetros Bimetálicos, Indicadores digitales de temperatura (RTD, Termopares, Termoresitores), termómetros infrarrojos, bloques secos, baños líquidos, baños María, Hornos, Estufas, Reactores DQO,Termopares tipo J,K,T,E,R,S,N,B,C, RTD´s, Pt-100,PT-10000, Termo resistores.

Alcance de Calibracion:

Indicator and Sensor RTD: Pt385: -196 °C to 700 °C, Pt3916: -196 °C to 650 °C , Pt3926: -196 °C to 650°C, Type J: -196 °C to 760 °C, Type K: -196°C to 1372 °C, Type T: -196°C to 400 °C, Type E: -196°C to 1000 °C, Type R: -50°C to 1768 °C, Type S: -50°C to 1768 °C, Liquids in Glass Thermometers: 0 °C to 600 °C, Sterilizer and Climatic Chambers. Ovens. Incubators: -100 °C to 340 °C , Water Baths. Temperature Control and Bain - Marie: -100 °C to 340 °C, Furnaces Sensor: 50 °C to 900 °C , Bi-Metal Thermometers: 0 °C to 600 °C, Thermostats: 0 °C to 600 °C, No contact Thermometers: 25 °C to 350 °C
Laboratorio de Humedad
Alcance de Calibracion:

Laboratorio de Masas

Balanzas, Básculas, Pesas clase de exactitud M1,M2,M3 (5kg,10kg,20kg), celdas de carga.

Alcance de Calibracion:


Scales and Balances: 1 mg to 211.07 g (Res.= 0.001 g) , 1 g to 201 g (Res.= 0.01 g), 200 g to 2 400 g (Res.= 0.5 g) , 5 g to 1 105 g (Res.= 0.005 g), 50 g to 4 050 g (Res.= 0.001 g) , 5 kg to 50 kg (Res.= 0.001 kg), 20 kg to 1 155 kg (Res.= 0.01 kg), 10 mg to 101.1 g (Res.= 0.01 g) , 1 g to 2 110 g (Res.= 1 g), Mass M1-M2-M3: 5 kg, 10 kg, 20 kg.

Laboratorio de Material de Referencia % OXigeno Disuelto

Alcance de Calibracion:

Oxygen Meters: 5 mg/L to 14 mg/L,

Viscosidad

Viscosímetros dinámicos, viscosímetros cinemáticos tipo: Ubbelhoden, Say Bolt, copas Din , Ford.


Alcance de Calibracion:

Viscosity Dynamic: 0 mPa •s o 6.7 mPa •s , 6.7 mPa •s to 48.4 mPa •s, 48.4 mPa •s to 303 mPa •s, 303 mPa •s to 950 mPa •s, 950 mPa •s to 2 213 mPa •s, 2 213 mPa •s to 12 500 mPa •s, 12 500 mPa •s to 22 532 mPa •s, Kinematic Viscosity Ubbelhoden: 5.55 mm²/s @ 40 °C, 8.84 mm²/s @ 25°C, 31.17 mm²/s @ 40°C, 58.82 mm²/s @ 25°C, 23.15 mm²/s @ 100°C, 171.25 mm²/s @ 40°C, 364.94 mm²/s @ 25°C.

Conductividad
Alcance de Calibracion:
Conductivity: 4 µS/cm to 84 µS/cm, 84 µS/cm to 148.16 µS/cm, 148.16 µS/cm to 1 413 µS/cm, 1 413 µS/cm to 12 850 µS/cm.

Espectofotometria

Alcance de Calibracion:
Spectrophotometers UV-Visible (Absorbance) at listed wavelengths (325 nm to 900 nm): 0.20 to 0.96

Densidad
Alcance de Calibracion:

Density Digital Density Meters:0.000 1 g/cm 3 to 1 g/cm³.

Laboratorio de fuerza y TensionSuperficial

Dinamómetros, celdas de fuerza, durómetros. Medidores de tensión superficial.

Alcance de Calibracion:

Force - Compression and Tension - Measure: 49 N to 490 N Class F1 and F2 Mass, 490 N to 9 807 N ABB/Altech 20210 - Load Cell , 98 N to 980 N Class M1 and M2, Superficial Tension Test :0.008 N/m to 0.065 N/m (8 dyne/cm to 65 dyne/cm)
Laboratorio de Dureza

Durómetros tipo shore, Rockwell.

Alcance de Calibracion:

Indirect Verification of Rockwell Hardness Testers HRC: 25 HRC to 45 HRC, 46 HRC to 65 HRC, 66 HRC to 70 HRC, Direct Verification of Durometer Hardness Tester Types A, B, C, D, DO, E, M, O, OO, OOO, OOO-S. Extension at zero reading: (Indentor Shape (Not all parameters apply to all of Durometer Types): 2.46 mm to 2.554 mm, Indentor Diamete: 1.25 to 50 mm, Indentor Tip Diameter: 1.27 to 12 mm, Indentor Tip Radius: 0.1 to 11 mm, Indentor Tip Angle; 30° to 35 ° , Durometer Indentor Spring Types A, B, C, D, DO, E, M, O, OO, OOO, OOO-S.: 0.55 N to 8.05 N, 4.5 N to 45 N,
Laboratorio de Par Torcional

Herramientas de torque, transductores de torque, atornilladores.

Alcance de Calibracion:

Torsional Par Wrenches: 0.1 N ·m to 250 N ·m, 250 N ·m to 440 N ·m, 440 N ·m to 1 000 N ·m , Torsional Par Transducers: 0.1 N ·m to 500 N

Laboratorio de Dimensional
Equipos a Calibrar

Calibradores, micrómetros, indicadores, indicadores de nivel, escalas metálicas y de cristal, reglas, flexómetros, mesas de plenitud, cribas, calibrador de alturas, medidor de ángulo, comparador óptico, microscopios, medidor de espesores, medidor de recubrimiento, medidor de rugosidad.

Alcance de Calibracion


Caliper Gauge: 1.0 mm to 1 500 mm, Micrometers: 1.0 mm to 1 000 mm, Monitoring Indicators and Level Type: 0.005 mm to 50 mm, Metallic and Glass Scales Error of Indication: 0.005 mm to 2 000 mm, Flexible Tapes Measure and Flexo meter Error of Indication: 50 000 mm, Height Gage: 12 mm to 1 000 mm, Sieve: 0.01 mm to 50 mm, Reticle radius: 0.01 mm to 50 mm, Reticle for length: 0.01 mm to 50 mm, Digital Protractor: 0° to 360 °, Optical Comparators Axis Linearity (X,Y): X= 500 mm Y= 500 mm , Angularity: 0° to 360 °, Axial Orientation: 1° at 4 in Y axis travel, Magnifification: 5X to 100 X, Microscopes Scale (X, Y): 200 mm, Microscopes Scale Magnification: 5X to 50X, Thickness Gages: 25 mm to 100 mm, Coating Thickness Gauge: 25 µm to 2 000 µm, Surface roughness tester Ra: 0.42 µm to 2.94 µm, Surface roughness tester Ry:1.7 µm to 11.4 µm

Laboratorio de Volumen
Equipos a Calibrar

Micro pipetas, pipetas, vasos de precipitado, buretas, recipientes aforados, tituladores digitales.


Alcance de Calibracion:
Micropipettes: 1 µL to 500 µL, Pipettes: 1 mL to 100 mL, Burettes : 1 mL to 100 mL, Probes : 100 mL to 1 000 mL , Volumetric Flask: 1 mL to 250 mL, 2 000 mL to 20 000 mL

Laboratorio de Optica
Equipos a Calibrar

Luxometros

Alcance de Calibracion

Light meters Luxometers: 1 lux to 40 000 lux

Laboratorio de Acustica
Equipos a Calibrar


Sonometro


Alcance de Calibracion

Sonometers: Low Level, 35 dB to 74 dB, Sonometers -High Level: Level
74 dB to 130 dB

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
© IME, Ingeniería y Metrología en Instrumentos de Control y Pruebas.
Todos los derechos reservados. Powered by NH INTRATECH